3xLOGIC VX-2AD3-IWD IP Camera Driver
, 3xLOGIC, VX2AD3IWD, Dome Network Camera, VISIX V-Series, Outdoor, IP66 Enclosure, 2 Megapixel, Infrared, WDR, With Base Analytic Module. 1, Surveillance Systems and Equipment. 3xLogic. VX-2AD3-IWD. VX-2AD3-IWD. VISIX 2MP V-Series, Outdoor Dome Style 4mm Fixed Lens Camera with. 3xLogic VX-2A-B-IWD Manual Online: Network Loss. Steps: 1). Opening the Security Camera 3xLogic VX-VTOF Quick Start Manual. Visix time of flight.
|Supported systems:||Windows All|
|Price:||Free* [*Free Registration Required]|
3xLOGIC VX-2AD3-IWD IP Camera Driver
Safety Wire The dome cover is attached to the camera body with this safety wire to prevent the dome cover from being dropped. The sensor should not be blocked by any object. Class 4 and higher recommended for HD recordings.
Reset Button It restarts the device or resets it to the factory default settings. Refer to Section 6: Reboot and Section 7: Factory Default for more details.
Refer to the device s installation guide for more various mounting types. Place the installation template included in the package on the desired installation surface.
V-Series 2MP Exterior Dome 3xLOGIC
Drill the two holes for the plastic anchors and a big hole for the cable lines based on the template paper, and insert the plastic anchors into the drilled holes. Attach the provided bottom pad to the 3xLOGIC VX-2AD3-IWD IP Camera of the camera body for the prevention of water permeation.
Detach the dome cover from the camera body by loosening the three screws with the provided Torx wrench T Make the screws m4x35 ready for the installation: Insert the provided waterproof bracket and the O-ring into the screw in a row by placing the head of the bracket beneath the 3xLOGIC VX-2AD3-IWD IP Camera head by reference to the squared image on the left. Take the camera to the ceiling, and connect the necessary cables including a LAN cable and a power cable or PoE cable dropped from the ceiling to the corresponding connectors on 3xLOGIC VX-2AD3-IWD IP Camera camera.
Align the screw holes on both sides of the camera body and the installation surface, insert the screws prepared at the step 5 into the screw holes on the camera body, and tighten them into the plastic anchors on the ceiling with a screw driver.
3xLogic VX-2AD3-IWD Manuals
Adjust the angle of the camera. Refer to Section 3: Adjusting Angle of the Camera for more details.
Reattach the dome cover to the camera body by aligning the screws on the dome cover with the alignment holes on the camera body. Refer to the caution below for the alignment method.
V-Series 2MP Exterior Dome
Once properly aligned, tighten the screws into the camera body with the provided Torx wrench T20 for the firm attachment of the dome cover. Thus, the part shaped differently from the other two screw hole parts shall be aligned with the corresponding part of 3xLOGIC VX-2AD3-IWD IP Camera dome cover, which is also shaped differently from the other two parts.
Refer to the image on the right for the clarification. Do not forcefully pull or shake the dome cover as it is linked to the camera body with a safety wire.
Video Surveillance Cameras
To prevent products from damage, place the camera on stable and non-vibrating surfaces. If the stability is in doubt, consult the safety personnel for reinforcements, and then proceed with the installation.
To pan, rotate the gimbal bracket horizontally. To tilt, tilt the camera gimbal by vertically adjusting it. Refrain from continuous rotation of the gimbal or the inner liner to a single direction as they are attached 3xLOGIC VX-2AD3-IWD IP Camera the IR-LED cable inside.
- Cameras 3xLOGIC
- Video Surveillance Cameras
- You are here
Be careful not to make the ambient light sensor hidden by the dome cover when adjusting the camera angle. The ambient light sensor shall be uncovered for its normal operation.
3xLogic VX-2A-B-IWD User Manual: Network Loss
Tighten the tilt stopper screw after the angle adjustment is completed. For the horizontal rotation of the lens, rotate the inner liner clockwise or counter-clockwise. The utility makes detection and configuration of VISIX camera s in any network environment simple and easy, regardless of network complexity. Both methods require that the camera and the PC being used 3xLOGIC VX-2AD3-IWD IP Camera communicate with it reside on the same network.
XXX are used, the following procedure can be used to identify a device s IP address.