LXNAV V5 vario Digital Variometer Driver
It is my great pleasure to announce a new product by LXNAV, V7. V7 is a standalone digital speed-to-fly variometer and final glide calculator . The V5 is a vario Module for use with only the LX, LX and the. LX GPS-Navigation System with Variometer. Version LXNAV d.o.o. • Kidričeva 24, Celje, Slovenia • tel + 33 fax + 33 The V9 and V5 variometers have six programmable digital inputs. Two of them re special. LXNAV LX Flarm + AHRS + V5 vario more info on
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* [*Free Registration Required]|
LXNAV V5 vario Digital Variometer Driver
At last character position, push button will confirm edited value, long press will cancel editing and exit that control Spin Control Spin controls are designed for numeric parameters. Combination of push button and knob rotation will change the value with a larger step Selection Control Selection boxes, also known as combo boxes are used to select a value from a list of predefined values.
Use the page selector to scroll through the list Checkbox and Checkbox List A checkbox enables or disables a particular parameter. Press push button to toggle the value. If an option is enabled a check mark will be shown, otherwise an empty rectangle will be displayed Slider selector Some values like volume and brightness are displayed as a slider Page 11 of 31 12 With push button you can activate slider control, then with rotation of the knob you can select the preferred value and confirm it with the push button.
Page 12 of 31 13 4. All settings are saved in the power off procedure. We strongly recommend switching off the unit using push button and not use a separate master switch. If the system is LXNAV V5 vario Digital Variometer off by a master switch changed data will not be saved. Flight parameters at takeoff like target altitude and position will remain in stored memory so your final glide calculations are not LXNAV V5 vario Digital Variometer.
A pilot has access to all of them using rotary knob and push button.
- LXNAV Digital variometers - All the products on AeroExpo
- Digital variometer with speed to fly function. Version 1.01
Main screen, all navigation and flight parameters defined by pilot Quick access, MacCready, Ballast, Bugs. Settings, setup of the whole system 5.
Digital variometer / electric / for aircrafts / 2-inch - S7 - LXNAV d.o.o. - Videos
Printed scale can be chosen when ordered in the range of -5 to 5 or from to Within the software the range can be set to 2. Upper, middle or lower LXNAV V5 vario Digital Variometer can be configured as average vario, altitude, altitude in feet, flight level, flight time, voltage, speed to fly, absolute pressure. Red diamond symbol can show average vertical speed. Blue arrow symbol shows current MacCready value.
Page 14 of 31 15 5. In the last row of the box is calculated final glide E and required speed for that final glide, values depends on MacCready, Bugs and Ballast setting.
Turn the knob to select the appropriate setup item. Press the PUSH button to enter a menu.
A dialogue or sub-menu will open Logbook Each flight is stored in logbook. Because S3 can not receive GPS data, only duration of the flight is written in logbook.
Page 15 of 31 16 5. Press the PUSH button and start editing the value QNH This feature may be used to offset the altitude datum as the result of pressure changes during the flight. Since changing the QNH influences the indicated altitude Set elevation LXNAV V5 vario Digital Variometer Set Elevation show on start-up, item is not checked, Set elevation menu, will not be displayed during start up.
Vario needle filter Sets a time constant of the vario needle.
The value can be adjusted between 0. Default value is 1. The default is 20 seconds.
LXNAV digital variometers
Page 16 of 31 17 5. Page 17 of 31 18 5.
Weight of water ballast, which is entered in kg or lb. If this option is used the weights of the glider and pilot must be entered.
Refer to Chapters for more details of how to enter glider and pilot weights. Ballast can be displayed as Overload factor or Wing Load or just weight of ballast.
Page 18 of 31 19 5. Use Brightness control to adjust intensity of the LCD backlight.
Upper, Middle and Lower Numeric Display: The parameter displayed can be configured. Following parameters can be displayed: As a default polar a standard class glider is enabled automatically.
Page 19 of 31 20 Polars for most modern gliders are already prepared.