Rosewill RC-212 PCI SATA Card VIA Vista

Forum discussion: Hey Guys I just bought some PCI sata controller cards from have, For a Rosewill RC it say to press the tab key during boot up. . you can "cheat" by booting the XP drive on a controller that is already. Rosewill RC PCI SATA / IDE Controller Card. External Ports: 2 x SATA ; Features: Chipset: VIA Bus Interface: PCI bus 32 bit Rosewill special. Need to add an additional hard drive to your system but don't have any ports left? Well, the Rosewill RC controller card will provide all the ports you need.

I think it is comparable with the raid found in most current MB's which is what the community refers to as 'fakeraid'. If so, the good news is that the Linux dmraid software would probably serve the same purpose as the Windows drivers to to run it in your system.

Looking at the Newegg site and following the link to the manufactures website indicates that the card uses a via chip set. There shouldn't be anything 'that old' about its PCI bus standards: I'm not nor do I welcome risks. Either it's dead right or apparently wrong.

This fix is also in recent Linux kernels, so Linux will not experience this issue. The technical details are reported to be as follows: Setting it to 1 makes the watermark 64DW.

Thoughts on using eSATA: If you plan to use external eSATA devices with 9x, assigned drive letters can be an issue. Attaching a drive may cause drive letters to shift. Primary partitions get the first drive letters in the order the drives are recognized by BIOS, then extended partitions in the order the drives are recognized by BIOS.

The advantage is since DOS does not see the drive, the drive letter does not become "anchored" and Windows can assign it any drive letter similar to USB flash drives. Nope Only utilised it for recognizing my drives.

Worked proper out of the box without having the want to use the drivers on the disk. Functionality is slow as people have stated. I am making use of it with two 1TB Hatchi sata drives with no raid.

I have not tested the ide port but over all this is a fantastic raid card if all you want is some ports. Utilised the card to add an SATA mirror into a server. Card functions fine in Server Not certain the point. Fantastic value and free shipping, comes with two sata cables and 1 ATA cable plus power adapters, really uncomplicated install, and as generally rapid shipping from newegg none so far purchased this to hook up a gb hd in an older machine, set up Rosewill RC-212 PCI SATA Card VIA flawlessly and difficult drive is totally functional as a 2nd drive, havent attempted to boot from this card however, but would suggest to anyone with an older mobo that wants to add sata or ata port Indiya Rosewill RC-212 PCI SATA Card VIA Date: